Installing a Home Theater? Leave the Wiring to an Electrician

Everything You Need To Know About Preparing Your Home For New Windows

If you have been looking at replacement windows for your renovation projects, there may be other options that you want to consider. When the replacement windows cannot be used, new window installation is another option, but there is still a lot of work that needs to be done to prepare your home for the new window improvements. The following steps will help you check window sizes and start preparing your home for a new window installation project:

Decide on The Type of Windows You Want to Use and Where They Are Going to Be Installed

There are many different types of windows that you can install in your home once the old windows are removed. If you have brick, look for windows that have the same width of casing, so the brick does not need to be changed. In addition, consider options like casement windows, double-hung, and impact windows to protect your home from severe weather.

Taking All the Measurements to Prepare Your Home for New Windows

The most important step in preparing your home for the installation of new windows is taking all the necessary measurements. Make sure that casings will work with existing exterior finishes and measure the width and height of your windows. If the windows are a little larger or smaller than modern standards, some of your new windows may need to be custom-ordered and manufactured specifically for the openings in your home.

Removing the Old Windows and Doors, and Inspecting the Openings for Damage

Once you have the new windows ordered and you know approximately when they will be delivered, you will be ready to start removing the old windows just before they arrive. You will want to use a flat bar and nail punch to remove windows from the openings and put them in a safe place. You may want to contact a service that deals in salvaged building materials to see if anyone is interested in buying them or at least picking them up for you to get rid of the old windows.

Preparing the Exterior Finishes and Trim, and Checking to Make Sure Openings Are Square and Level

If you have brick on the exterior of your home, you want to make sure that the moldings around new casings will fit in the existing holes. If you have synthetic stucco, siding, or other materials, sometimes these materials can be cut to adjust the openings for larger trim molding around the exterior of the casing. Usually, it is best to try to find windows that are a similar size or slightly smaller. If the molding is smaller, you can use small pieces of trim moldings to close the gaps and seal them with caulking before painting.

These are some of the things that you will need to do to get ready for new window installation when doing renovations to your home. If you are ready to update your home with new windows, contact a window installation service and talk to them about some of the improvements you want to have done when the windows are installed.


Share